Worldwide Conformal Coatings Technology Industry Report - Featuring NanoSlic, Sernova and CSIRO Among Others

News provided by

Mar 25, 2022, 17:00 ET

DUBLIN, March 25, 2022 /PRNewswire/ -- The "Global Conformal Coatings Technology Growth Opportunities" report has been added to ResearchAndMarkets.com's offering.

The printed circuit boards (PCBs) used in electronic components are prone to the adverse effects of external environments, which may lead to short circuits or overall system failure. Rising concerns among electrical manufacturers to protect the board and its components from moisture, chemicals, salt spray, and temperature fluctuations are driving the adoption of conformal coatings technology.

Electronics miniaturization has led to complex circuit design, which necessitates the demand for ultra-thin insulating conformal coatings to allow reductions in PCB conductor spacing. The need for coatings technology with complete cures in short periods is a priority in terms of supporting rapid production output with a low margin of defects.

At present, solvent-based polymer conformal coatings technology dominates the market; however, it is limited with respect to chemical and electrical performance in challenging operating conditions. Stringent emission norms are encouraging the elimination of solvents with high volatile organic compounds (VOCs), and the industry is shifting to UV/LED curing technology and the implementation of cost-effective automated systems. Innovation in material technology, including composites, nano, and bio-based materials, and the integration of cutting-edge application systems and advanced curing systems will create new growth opportunities for industry participants.

The conformal coatings application process is critical in terms of providing an adequate level of protection according to system design and material selection. Various technologies are available commercially, which can impact the depth of the coating applied, the level of coverage required, and the coating adhesion to the board and its components. Conformal coatings application technology is witnessing significant developments as the brushing, dipping, and manual spraying methods are labor-intensive and time-consuming processes.

The probability of defects is higher with human intervention, which may result in production delays, and rework costs are also high. The development and the implementation of automated systems such as selective needle dispensing, ultrasonic coating, selective film coating, selective tri-mode coating, and precision jet coating will support rapid throughput to meet the rising demand. The integration of hybrid deposition processes that deliver improved film thickness and composition uniformity for complex designs will benefit industry participants.

This study identifies and analyzes technology advancements focused on enhanced electrical component protection with new material development, improved application processes, and advanced curing techniques. Technology advancements focus on the PCBs used to connect electrical components across the automotive, military, aerospace, marine, telecommunications, industrial, healthcare, and consumer electronics sectors. The study provides insight into the key focus areas of the technology, the challenges, and the adoption strategies for better utility. The research service also covers the commercial landscape of technological advancements in conformal coatings.

The publisher has identified key areas of technology development for conformal coatings, categorized into different domains such as:

materials, including polymers, composites, specialty materials, and nano and bio-based materials
Solventless and 100% solids formulations
automated and selective coating techniques
UV, LED, and longwave infrared thermal curing.

Electrical component manufacturers have increased R&D investments in advanced systems to meet the rising consumer demand for low-cost, compact, and durable devices. Owing to the intense competition, conformal coatings companies are forming alliances with research universities for new material development and assessment across different industries. Factors such as ease of processing, cost-effectiveness, compatibility with different materials, and extent of application are driving the technology landscape.

Key Questions Answered:

What are the emerging conformal coatings technologies?
What R&D efforts are being taken in terms of material innovation for improved electrical component protection?
What are the new trends in terms of materials, application processes, and curing techniques? At which stage of commercialization are they?
What are the growth opportunities for technology developers in the conformal coatings technology market?

Key Topics Covered:

1. Strategic Imperatives

2. Growth Opportunity Analysis

Conformal Coatings' Demand is Driven by the Need for Effective Circuit Protection and Reduced Conductor Spacing in Electrical Components
Key Technical Attributes of Conformal Coatings
Key Selection Criteria for Conformal Coatings in PCBs
Labor and Reworking Costs and Complex Curing Mechanisms are the Key Challenges Associated with Conformal Coatings
Rapid Production Output, Regulations, and Technological Advancements are Driving Material and Curing Process Innovation
Research Coverage and Scope
Key Findings

3. Conformal Coatings: Technology Chain Analysis

Conformal Coatings: Technology Value Chain
Materials Used in the Manufacture of Conformal Coatings
Types of Curing Processes Used in the Manufacture of Conformal Coatings
Techniques Used in the Application of Conformal Coatings onto Substrates
Conformal Coatings: Application Outlook across Industries

4. Polymers for Conformal Coatings: Technology Analysis

Acrylic and Silicone are Widely Used Polymers for Conformal Coatings
Polymeric Blends and Inherently Conductive Polymers are Gaining Attraction due to Their High Electrical Performance
Solvent-free Formulations with Low/Nil VOC Content can Increase the Adoption of Polymer-based Conformal Coatings
Mapping of Polymers to Recommended Curing and Application Processes
Polymer-based Conformal Coatings Application Outlook across Industries
Key Stakeholders Developing New Technologies in Polymer Conformal Coatings
Polymer-based Conformal Coatings: Comparative Outlook of Application Prospects
Polymer-based Conformal Coatings: Comparative Outlook of Application Prospects - Analyst Perspective

5. Composites for Conformal Coatings: Technology Analysis

Customized Formulations Specific to Application and Performance Requirements Drive the Use of Composites in Conformal Coatings
High Electrical Performance and Wide Operating Range Benefits Drive the Adoption of Composite Materials
Mapping of Composites to Recommended Curing and Application Processes
Composites-based Conformal Coatings Application Outlook across Different Industries
Key Stakeholders Developing New Technologies in Composites Conformal Coatings
Composites-based Conformal Coatings - Comparative Outlook of Application Prospects
Composites-based Conformal Coatings: Comparative Outlook of Application Prospects - Analyst Perspective

6. Nanomaterials for Conformal Coatings: Technology Analysis

Ultra-thin Coating Applications Offer Superior Performance and Drive the Growth of the Nano-conformal Coatings Market
Enhanced Hydrophobicity and Physicochemical Properties will Drive the Adoption of Nano-conformal Coatings in Biomedical Applications
Outstanding Dielectric Strength will Create a Strong Application Outlook for Nano-conformal Coatings
Mapping of Nanomaterials to Recommended Curing and Application Processes
Nano-conformal Coatings Application Outlook across Different Industries
Key Stakeholders Developing New Technologies in Nano-Conformal Coatings
Nanomaterials-based Conformal Coatings - Comparative Outlook of Application Prospects
Nanomaterials-based Conformal Coatings: Comparative Outlook of Application Prospects - Analyst Perspective

7. Bio-based Materials and Specialty Materials for Conformal Coatings: Technology Analysis

Specialty Material Conformal Coatings are Suitable for Flexible Electronic Circuits Applications
Key Stakeholders Developing New Technologies in Specialty Materials Conformal Coatings
Specialty Materials-based Conformal Coatings: Comparative Outlook of Application Prospects
Specialty Materials-based Conformal Coatings: Comparative Outlook of Application Prospects - Analyst Perspective
Bio-based Conformal Coatings Offer an Alternative Solution to Petrochemical Materials
Key Stakeholders Developing New Technologies in Bio-based Conformal Coatings
Bio-based Material Conformal Coatings Technology - Comparative Outlook of Application Prospects
Bio-based Material Conformal Coatings Technology: Comparative Outlook of Application Prospects - Analyst Perspective

8. Curing Processes for Conformal Coatings: Technology Analysis

Suitable Curing Processes Configured with the Appropriate Materials are Necessary for the Achievement of Desired Performance
Heat Cure is Widely Used to Accelerate the Curing Mechanism after the Primary Curing Process
UV and LED Cure are Suitable for Use across a Wide Range of Materials, and they Deliver Full Coverage under Sharp Components
High Energy Costs and Environmental Concerns are Key Factors Influencing the Curing Selection Process
Key Stakeholders Developing Curing Processes for Conformal Coatings
UV and LED Systems Deliver Uniform Curing and Offer a Competitive Edge in Fast Production Output
Comparative Analysis for Curing Processes for Conformal Coatings - Analyst Perspective

9. Application Techniques of Conformal Coatings: Technology Analysis

Application Processes Determine Coating Adhesion and Reliability in Electrical Components
Automated Spraying and Selective Coatings are Widely Used Application Techniques
Accuracy and Uniform Coating Requirements will Drive the Adoption of Deposition Processes
The Combination of the PVD and the CVD Application Processes Offers Enhanced Coating Performance
Equipment and Production Output Will Play a Crucial Role in the Selection of Cost-competitive Application Processes
Key Stakeholders Developing New Technologies in Conformal Coating Application Processes
Automated Application Processes Offer High Productivity with Low Frequency of Defects
Comparative Analysis for Application Techniques for Conformal Coatings - Analyst Perspective

10. Patent Analysis

IP Analysis Indicates an Increase in Patent Filing Activity in Conformal Coatings from 2017 to 2021
Electronic Companies are the Most Active in IP Filings Related to Conformal Coatings Technologies
Acrylic, Silicone, Polyurethane, and Epoxy Materials Registered the Highest Patent Filings from 2017 to 2021
Top Assignee Breakdown by Materials Used for Conformal Coatings, 2017-2021
Two-part Systems Curing and Dipping Processes are the Leading Patent Filings among Curing and Application Techniques

11. Companies to Watch

NanoSlic's Ceramic Chemistry Offers Green Chemistry and Cost-effective Coating Solutions
Sernova's Conformal Coating Immune Protection Technologies Eliminate the Need for Immunosuppression Medication
CSIRO is Working on the Commercial Development of Inherently Conductive Polymers
Electrolube's Bio-conformal UVCLX Technology Offers an Alternative to Solvent-based Coatings
Sieka's AI-TEC PCB Curing System can Control Coating Width and Thickness with Ultra-Precision
Nordson Corporation's ASYMTEK Automated Ratio Calibration (ARCT) Technology Dispenses Two-component Fluids in Accurate Ratios

12. Growth Opportunity Universe

Growth Opportunity 1: Development and Commercialization of Bio-based and Nano Conformal Coatings with Better Hydrophobic Properties to Deliver Ultra-thin Protection and Low Impact on Component Weight
Growth Opportunity 2: Strategic Collaborations between Conformal Coatings Manufacturers and Consumers for Advancements in Dispensing and Curing Systems to Support Automated Processes for Faster Production Output
Growth Opportunity 3: Implementation of Cutting-edge Hybrid Deposition Technologies for Consistent Coating of 3D Configurations, High Quality, and Environment-friendly Application Processes
Growth Opportunity 4: Investments in R&D and New Production Facilities for Innovation, Technology Advancements, and an Enhanced Presence in the Consumer Electronics Industry

13. Appendix

14. Next Steps

For more information about this report visit https://www.researchandmarkets.com/r/9bldg9

Media Contact:

Research and Markets
Laura Wood, Senior Manager
[email protected]

For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900

U.S. Fax: 646-607-1904
Fax (outside U.S.): +353-1-481-1716

SOURCE Research and Markets