Scuderi Group Announces Publication of Miller Cycle Patent Application and Technical Papers

WEST SPRINGFIELD, Mass., April 2, 2012 /PRNewswire/ -- Scuderi Group, an engine development company, today announced the simultaneous publication by both the United States Patent and Trademark Office (USPTO) and the World Intellectual Property Organization (WIPO) of its primary patent application covering Miller Cycle operation applied to a split-cycle engine.  The patent application is titled "Turbocharged Downsized Compression Cylinder For A Split-Cycle Engine", and has been assigned USPTO publication number  US-2012-007351 and WIPO publication number WO-2012/040431.  The WIPO publication can be viewed in its entirety at www.scuderiengine.com/assets/Uploads/WO2012040431-A1.pdf.

[An audio podcast explaining this news can be heard at www.ScuderiEngine.com/millerpatent.]

Tweet This: #MillerCycle applied to the Scuderi Engine for greater fuel efficiency. Read more at www.ScuderiEngine.com/millerpatent-040212

The patent application relates to a turbocharged split-cycle engine that divides the four strokes of a conventional Otto cycle engine over two paired cylinders. One cylinder, called the "compressor", does the intake and compression strokes, while the other cylinder, called the "expander", does the expansion (or power) and exhaust strokes. The compressor and expander are connected by a specially-designed crossover port to enable the transfer of compressed gas.  In a split-cycle engine, each of the four strokes is completed in one revolution of the crankshaft, as opposed to the four strokes requiring two revolutions in a conventional engine. The split-cycle engine requires the same number of cylinders as a conventional engine, but the compressor and expander cylinders must be equally paired.

Miller Cycle operation of any reciprocating internal combustion engine, whether the engine is split-cycle or conventional, necessitates the engine be configured in such a way that the gas is expanded more during the expansion stroke than it is compressed during the compression stroke. Accordingly, gas will be over-expanded during the expansion stroke, resulting in a significant increase in efficiency. In a conventional engine, Miller operation is typically accomplished through early or late intake valve closing, which detrimentally reduces volumetric efficiency and increases pumping losses across the intake valves. This detriment is negated in a split-cycle engine, such as the SCUDERI™ Split-Cycle Engine, as Miller Cycle operation may be achieved by physically reducing the compressor displacement relative to the expander displacement.

"Applying the Miller Cycle to the SCUDERI Split-Cycle Engine is significant because it gives a split-cycle engine a significant advantage over a conventional engine when it comes to operating the Miller Cycle," said Stephen Scuderi, vice president and patent attorney at Scuderi Group. "In this configuration, the compression cylinder can always run at or near maximum volumetric efficiency no matter how much it is downsized relative to the expansion cylinder; and achieving maximum volumetric efficiency keeps pumping losses across the intake valves to a minimum."

A technical paper focusing on the Miller Cycle as applied to split-cycle technology will be presented at the 2012 Society of Automotive Engineers (SAE) World Congress, taking place April 24-26, in Detroit. The paper is titled "Miller Cycle Application to the SCUDERI Split Cycle Engine (by Downsizing the Compressor Cylinder)" (SAE paper number 2012-01-0419). It may be downloaded at http://papers.sae.org/2012-01-0419.

Also to be presented at the 2012 SAE World Congress is a paper titled "SCUDERI Split Cycle Engine: Air Hybrid Vehicle Powertrain Simulation Study" (SAE paper number 2012-01-1013). It may be obtained at http://papers.sae.org/2012-01-1013. This paper describes the results and full methodology of Scuderi Group's recently released findings from a comprehensive computer simulation study predicting the performance of a computer modeled, Scuderi-powered vehicle.

The Scuderi-powered vehicle represented a typical European "high economy" vehicle powered by a turbocharged, air-hybrid, Miller-applied, SCUDERI Split-Cycle Engine. The projected data showed that the Scuderi-powered vehicle could potentially achieve 65 miles per U.S. gallon (77 UK mpg or 3.7 liters per 100 km). Additionally, the Scuderi-powered vehicle was projected to emit only 81.6 g/km of CO2 - significantly less than the 120 g/km of CO2 goal currently set by the European Union.

The study also compared the predicted performance of the Scuderi-powered vehicle to a representative group of top selling European "high economy" vehicles. The results showed the Scuderi-powered vehicle to be a full 25 percent more efficient than the average of the European vehicle group and 13 percent more efficient than the best in class of the group.

In addition to the technical papers, Scuderi Group will also be discussing the engine's energy storage capabilities during the SAE World Congress Expo taking place April 24-26, 2012, in Detroit, MI. Visit http://www.ScuderiEngine.com/how-the-scuderi-engine-can-store-energy for more information about the Scuderi Engine and compressed air energy storage.

About Scuderi Group
Scuderi Group, LLC is an engine development company that has advanced the design of the internal combustion engine through its split-cycle engine technology.  Split-cycle engine technology has the potential to increase fuel efficiency and reduce emissions beyond what conventional engines achieve today.  Additionally, the SCUDERI™ engine provides the manufacturability and power density required by the world's largest engine manufacturers.

Scuderi Group is headquartered in West Springfield, Mass., with offices in Frankfurt, Germany, and Nagoya, Japan.  The company holds a patent portfolio that contains more than 500 patents filed and over 200 patents issued worldwide.

Media Contacts:

North America
Carol Hanko
Lois Paul and Partners
512-638-5302
[email protected] 

Bill Wrinn
Scuderi Group
413-439-0343
[email protected]

Germany
Hana Bursik
Content Company
49-611-450-3817
[email protected]

France
Angela Hepburn
Be-SR SARL.
33 6 84 81 51 56
[email protected]

Asia
Mayumi Hirano
Creative PR, Inc.
+81-3-5645-7321
[email protected]

SOURCE Scuderi Group