NexGen Drills Most Off-Scale to Date in A3 Shear and Expands Arrow with Extensive Zones of Mineralization Across Key Growth Areas
VANCOUVER, Oct. 2, 2017 /PRNewswire/ - NexGen Energy Ltd. ("NexGen" or the "Company") (TSX:NXE, NYSE:NXE) is pleased to report radioactivity results for 22 holes as part of the on-going summer drilling program on our 100% owned, Rook I property, Athabasca Basin, Saskatchewan. An additional diamond drill rig was brought into operation to assess the recently discovered South Arrow zone, which is located 400 m south of the Arrow Deposit.
Eight diamond drill rigs are now active at the Arrow Deposit and South Arrow with infill, step-out and exploration drilling underway. In addition, one sonic drill rig testing subsurface conditions as part of the pre-feasibility geotechnical study has successfully completed its work. Additional geotechnical drilling continues utilizing a diamond drill rig. Initial geotechnical drilling discovered an interval of semi-massive pitchblende mineralization 130 m northwest and up-dip from the A1 mineral resource domain.
A3 High Grade Domain Infill Drilling
- Infill hole AR-17-147c3 intersected 79.5 m of total composite mineralization including 17.35 m of total composite off-scale radioactivity (>10,000 to >61,000 cps) within a 114.5 m section (542.0 to 656.5 m). This intersection is the most extensive off-scale radioactivity intersected in the A3 shear to date (see Figure 1).
- Infill hole AR-17-147c4 intersected 67.5 m of total composite mineralization including 5.45 m of total composite off-scale radioactivity (>10,000 to >61,000 cps) within a 182.0 m section (588.0 to 770.0 m).
- Infill hole AR-17-155c2 intersected 41.0 m of total composite mineralization including 5.15 m of total composite off-scale radioactivity (>10,000 to >61,000 cps) within a 100.0 m section (486.5 to 586.5 m).
Expansion in the Southwest and Northeast Gaps
In the resource growth areas of the southwest and northeast gaps, broad zones of mineralization including off-scale radioactivity have been intersected throughout (Figure 2).
- Step-out hole AR-17-129c5 intersected 71.0 m of total composite mineralization including 5.85 m of total composite off-scale radioactivity (>10,000 to >61,000 cps) within a 295.0 m section (616.5 to 911.5 m) in the A2 through A5 shears in the northeast gap.
- Step-out hole AR-17-156c1 intersected 38.0 m of total composite mineralization including 3.0 m of total composite off-scale radioactivity (>10,000 to 30,500 cps) within a 87.0 m section (657.0 to 744.0 m) in the A3 and A4 shears in the southwest gap.
- Step-out hole AR-17-146c2 intersected 36.0 m of total composite mineralization including 2.55 m of total composite off-scale radioactivity (>10,000 to >61,000 cps) within a 121.0 m section (661.5 to 782.5 m) in the A3 and A4 shears in the southwest gap.
Geotechnical Drilling
Geotechnical drilling testing subsurface conditions as part of the pre-feasibility study has intersected uranium mineralization northwest of the A1 shear indicating the potential for additional shears to the northwest (see Figure 3).
- Geotechnical hole GAR-17-001 intersected 34.5 m of total composite mineralization including 0.9 m of continuous off-scale radioactivity (>10,000 to 54,000 cps) within a 265.5 m section (272.0 to 537.5 m).
Arrow Activities & Financial
- The eight diamond drill rig summer development and exploration program consisting of an expanded 35,000 m of drilling continues to be fully operational.
- Multiple advanced technical studies including geotechnical drilling, hydrogeological work, environmental and metallurgy are underway.
- The Company has cash on hand of approximately $185 million.
Longitudinal sections, a cross section view of GAR-17-001, and drill hole locations are shown in Figures 1 to 4.
Garrett Ainsworth, Vice-President, Exploration and Development, commented: "The summer drill program's objectives of increasing indicated mineral resources through infill, and inferred mineral resources through step-outs continue to be achieved. An important characteristic of the basement-hosted Arrow Deposit is its high degree of continuity in grade and thickness, which continues to be observed across the Deposit including in the A3 High Grade Domain where we expect a high conversion of inferred to indicated mineral resources. Expansion is also clearly evident through step-out drilling in the A4 shear, southwest and northeast gaps as well as the potential for a new shear to the northwest of the A1.
Leigh Curyer, Chief Executive Officer, commented: "These latest results which include the most extensive off-scale mineralization seen to date in the A3 shear highlights considerable future drilling is required to determine the full extent of Arrow. Infill drilling continues to demonstrate the intensity of mineralization often increases which is significant from a mine optimization planning perspective. Further, pre-feasibility study programs incorporating advanced engineering and environmental work is in full flight. Together, with the increase in drilling focus on the exciting South Arrow Discovery, NexGen is at an exciting stage of development."
Table 1: Arrow Deposit Drill Hole Data
Drill Hole |
Athabasca |
Handheld Scintillometer Results (RS-120) |
||||||
Hole ID |
Azimuth |
Dip |
Total Depth (m) |
From (m) |
To (m) |
Width (m) |
CPS Range |
|
AR-17-129c5 |
327 |
-70 |
960.50 |
N/A |
616.50 |
617.00 |
0.50 |
<500 - 570 |
655.00 |
657.50 |
2.50 |
<500 - 2500 |
|||||
692.50 |
693.00 |
0.50 |
4600 - >61000 |
|||||
728.50 |
730.00 |
1.50 |
<500 - 10500 |
|||||
740.00 |
740.50 |
0.50 |
<500 - 9100 |
|||||
748.50 |
751.50 |
3.00 |
<500 - 22000 |
|||||
754.00 |
754.50 |
0.50 |
<500 - 9400 |
|||||
757.50 |
761.00 |
3.50 |
<500 - >61000 |
|||||
766.00 |
774.00 |
8.00 |
<500 - >61000 |
|||||
777.50 |
781.00 |
3.50 |
<500 - >61000 |
|||||
784.50 |
789.50 |
5.00 |
<500 - 5000 |
|||||
793.00 |
800.00 |
7.00 |
<500 - 2800 |
|||||
803.50 |
804.00 |
0.50 |
<500 - 700 |
|||||
812.00 |
814.50 |
2.50 |
<500 - 2500 |
|||||
851.50 |
875.00 |
23.50 |
<500 - 57000 |
|||||
878.50 |
879.00 |
0.50 |
<500 - 1100 |
|||||
882.00 |
888.50 |
6.50 |
<500 - 13000 |
|||||
891.50 |
892.00 |
0.50 |
<500 - 2200 |
|||||
901.50 |
902.00 |
0.50 |
<500 - 1100 |
|||||
911.00 |
911.50 |
0.50 |
<500 - 580 |
|||||
AR-17-129c6 |
327 |
-70 |
876.50 |
N/A |
595.00 |
595.50 |
0.50 |
<500 - 830 |
710.50 |
711.00 |
0.50 |
<500 - 680 |
|||||
735.50 |
736.00 |
0.50 |
<500 - 820 |
|||||
778.00 |
778.50 |
0.50 |
<500 - 740 |
|||||
817.00 |
817.50 |
0.50 |
<500 - 550 |
|||||
AR-17-129c7 |
327 |
-70 |
960.50 |
N/A |
650.00 |
650.50 |
0.50 |
<500 - 780 |
668.00 |
669.00 |
1.00 |
<500 - 670 |
|||||
675.50 |
678.50 |
3.00 |
<500 - 36000 |
|||||
704.50 |
705.50 |
1.00 |
<500 - 8700 |
|||||
731.00 |
731.50 |
0.50 |
<500 - 55000 |
|||||
736.00 |
737.00 |
1.00 |
<500 - 660 |
|||||
765.50 |
766.00 |
0.50 |
<500 - 650 |
|||||
783.00 |
789.00 |
6.00 |
<500 - 58000 |
|||||
791.50 |
795.00 |
3.50 |
<500 - 1500 |
|||||
804.00 |
804.50 |
0.50 |
<500 - 2100 |
|||||
807.00 |
813.00 |
6.00 |
<500 - 3600 |
|||||
815.50 |
818.50 |
3.00 |
<500 - 1500 |
|||||
829.50 |
831.00 |
1.50 |
<500 - 2000 |
|||||
856.50 |
857.00 |
0.50 |
<500 - 1400 |
|||||
AR-17-143c2 |
147 |
-70 |
729.50 |
N/A |
562.00 |
562.50 |
0.50 |
<500 - 1400 |
AR-17-143c3 |
147 |
-70 |
974.00 |
N/A |
662.00 |
664.00 |
2.00 |
<500 - 1300 |
668.00 |
673.00 |
5.00 |
<500 - 4500 |
|||||
677.00 |
677.50 |
0.50 |
<500 - 1000 |
|||||
682.00 |
699.00 |
17.00 |
<500 - 11000 |
|||||
702.00 |
704.50 |
2.50 |
<500 - 1600 |
|||||
712.00 |
713.50 |
1.50 |
<500 - 3500 |
|||||
742.50 |
743.00 |
0.50 |
<500 - 2600 |
|||||
772.50 |
773.00 |
0.50 |
<500 - 2600 |
|||||
813.00 |
813.50 |
0.50 |
<500 - 790 |
|||||
856.00 |
860.00 |
4.00 |
<500 - 1300 |
|||||
863.50 |
864.00 |
0.50 |
<500 - 830 |
|||||
866.50 |
868.50 |
2.00 |
<500 - 3100 |
|||||
885.50 |
886.00 |
0.50 |
<500 - 670 |
|||||
924.00 |
928.00 |
4.00 |
<500 - 37000 |
|||||
930.50 |
934.00 |
3.50 |
<500 - >61000 |
|||||
938.00 |
938.50 |
0.50 |
600 - 3900 |
|||||
AR-17-146c1 |
327 |
-70 |
910.50 |
110.40 |
630.50 |
631.50 |
1.00 |
<500 - 11000 |
686.00 |
688.00 |
2.00 |
<500 - 45000 |
|||||
691.00 |
695.00 |
4.00 |
<500 - 7800 |
|||||
697.50 |
703.00 |
5.50 |
<500 - 2000 |
|||||
705.50 |
709.50 |
4.00 |
<500 - 5800 |
|||||
721.50 |
732.00 |
10.50 |
<500 - 15000 |
|||||
734.50 |
735.50 |
1.00 |
<500 - 2500 |
|||||
739.50 |
744.00 |
4.50 |
<500 - 2300 |
|||||
754.00 |
755.50 |
1.50 |
<500 - 3000 |
|||||
765.50 |
768.50 |
3.00 |
<500 - 3100 |
|||||
795.50 |
797.00 |
1.50 |
<500 - 800 |
|||||
AR-17-146c2 |
327 |
-70 |
907.00 |
N/A |
661.50 |
663.00 |
1.50 |
<500 - 10100 |
687.00 |
688.00 |
1.00 |
<500 - 550 |
|||||
694.50 |
699.00 |
4.50 |
<500 - 9100 |
|||||
704.50 |
705.50 |
1.00 |
700 - 6300 |
|||||
736.50 |
739.50 |
3.00 |
<500 - 830 |
|||||
742.00 |
742.50 |
0.50 |
<500 - 1200 |
|||||
747.50 |
763.50 |
16.00 |
<500 - 37000 |
|||||
767.00 |
772.50 |
5.50 |
<500 - 1450 |
|||||
777.00 |
778.00 |
1.00 |
<500 - 30000 |
|||||
780.50 |
782.50 |
2.00 |
<500 - >61000 |
|||||
AR-17-146c3 |
327 |
-70 |
993.50 |
N/A |
677.00 |
677.50 |
0.50 |
<500 - 700 |
709.00 |
709.50 |
0.50 |
<500 - 2300 |
|||||
722.50 |
723.50 |
1.00 |
<500 - 9200 |
|||||
728.00 |
732.50 |
4.50 |
<500 - 2200 |
|||||
744.00 |
745.00 |
1.00 |
<500 - 2100 |
|||||
753.00 |
763.00 |
10.00 |
<500 - 15000 |
|||||
765.50 |
768.00 |
2.50 |
<500 - 1160 |
|||||
770.50 |
772.50 |
2.00 |
<500 - 1250 |
|||||
777.00 |
777.50 |
0.50 |
<500 - 550 |
|||||
783.50 |
784.00 |
0.50 |
<500 - 1200 |
|||||
789.00 |
804.50 |
15.50 |
<500 - 12600 |
|||||
807.00 |
819.50 |
12.50 |
<500 - 7300 |
|||||
825.50 |
826.00 |
0.50 |
<500 - 560 |
|||||
912.50 |
913.00 |
0.50 |
<500 - 540 |
|||||
946.00 |
946.50 |
0.50 |
<500 - 950 |
|||||
954.00 |
956.00 |
2.00 |
<500 - 1170 |
|||||
964.00 |
964.50 |
0.50 |
<500 - 1440 |
|||||
AR-17-147c1 |
327 |
-70 |
621.50 |
133.90 |
454.00 |
454.50 |
0.50 |
<500 - 3000 |
492.50 |
495.50 |
3.00 |
<500 - 50000 |
|||||
510.00 |
511.00 |
1.00 |
<500 - 11000 |
|||||
515.00 |
515.50 |
0.50 |
<500 - 1800 |
|||||
521.00 |
525.00 |
4.00 |
<500 - 45000 |
|||||
532.50 |
536.50 |
4.00 |
<500 - 24400 |
|||||
541.50 |
545.00 |
3.50 |
<500 - 25500 |
|||||
556.50 |
567.50 |
11.00 |
<500 - >61000 |
|||||
572.00 |
573.00 |
1.00 |
<500 - 9000 |
|||||
576.00 |
592.00 |
16.00 |
<500 - >61000 |
|||||
599.00 |
599.50 |
0.50 |
<500 - 1400 |
|||||
606.00 |
607.00 |
1.00 |
<500 - 1200 |
|||||
AR-17-147c2 |
327 |
-70 |
660.50 |
133.90 |
454.50 |
455.00 |
0.50 |
<500 - 1300 |
498.50 |
499.50 |
1.00 |
1000 - 12000 |
|||||
530.00 |
530.50 |
0.50 |
700 - 10300 |
|||||
534.00 |
534.50 |
0.50 |
<500 - 7000 |
|||||
544.50 |
549.50 |
5.00 |
<500 - 25000 |
|||||
560.00 |
563.00 |
3.00 |
<500 - 22000 |
|||||
566.00 |
569.00 |
3.00 |
<500 - 6300 |
|||||
580.50 |
581.50 |
1.00 |
<500 - 550 |
|||||
592.00 |
593.00 |
1.00 |
<500 - 5500 |
|||||
605.00 |
612.50 |
7.50 |
<500 - 58000 |
|||||
618.50 |
619.00 |
0.50 |
<500 - 1000 |
|||||
624.00 |
626.00 |
2.00 |
<500 - 1800 |
|||||
629.50 |
630.50 |
1.00 |
<500 - 650 |
|||||
AR-17-147c3 |
327 |
-70 |
682.50 |
133.90 |
454.50 |
455.50 |
1.00 |
<500 - 2000 |
499.50 |
501.00 |
1.50 |
<500 - 12000 |
|||||
515.50 |
516.00 |
0.50 |
<500 - 530 |
|||||
528.50 |
529.50 |
1.00 |
<500 - 9500 |
|||||
536.50 |
539.50 |
3.00 |
<500 - 3000 |
|||||
542.00 |
543.00 |
1.00 |
<500 - 2500 |
|||||
546.50 |
552.00 |
5.50 |
<500 - 18600 |
|||||
554.50 |
563.50 |
9.00 |
<500 - 23000 |
|||||
573.00 |
573.50 |
0.50 |
<500 - 540 |
|||||
579.50 |
587.00 |
7.50 |
<500 - 43000 |
|||||
597.50 |
648.50 |
51.00 |
<500 - >61000 |
|||||
651.50 |
656.50 |
5.00 |
<500 - 1200 |
|||||
AR-17-147c4 |
327 |
-70 |
870.50 |
133.90 |
522.50 |
527.00 |
4.50 |
<500 - 9950 |
529.50 |
530.00 |
0.50 |
<500 - 4600 |
|||||
560.00 |
561.50 |
1.50 |
<500 - 11000 |
|||||
574.00 |
574.50 |
0.50 |
<500 - 670 |
|||||
588.00 |
593.50 |
5.50 |
<500 - 18000 |
|||||
614.50 |
615.50 |
1.00 |
<500 - 2000 |
|||||
618.00 |
626.00 |
8.00 |
<500 - 37000 |
|||||
628.50 |
630.00 |
1.50 |
<500 - 20000 |
|||||
632.50 |
648.00 |
15.50 |
<500 - >61000 |
|||||
655.00 |
660.50 |
5.50 |
<500 - 1360 |
|||||
668.00 |
668.50 |
0.50 |
<500 - 760 |
|||||
691.00 |
691.50 |
0.50 |
<500 - 750 |
|||||
695.00 |
696.00 |
1.00 |
<500 - 1100 |
|||||
713.00 |
715.00 |
2.00 |
<500 - 1100 |
|||||
717.50 |
723.50 |
6.00 |
<500 - 1700 |
|||||
729.00 |
732.00 |
3.00 |
<500 - 1800 |
|||||
752.50 |
770.00 |
17.50 |
<500 - 7600 |
|||||
792.50 |
794.50 |
2.00 |
<500 - 2550 |
|||||
804.50 |
814.00 |
9.50 |
<500 - 16000 |
|||||
848.50 |
853.00 |
4.50 |
<500 - 760 |
|||||
AR-17-148c1 |
327 |
-70 |
1054.00 |
N/A |
505.00 |
505.50 |
0.50 |
<500 - 1200 |
682.00 |
682.50 |
0.50 |
<500 - 1200 |
|||||
689.00 |
690.00 |
1.00 |
<500 - 1700 |
|||||
699.50 |
711.00 |
11.50 |
<500 - >61000 |
|||||
733.00 |
735.50 |
2.50 |
<500 - 5500 |
|||||
756.50 |
757.00 |
0.50 |
<500 - 700 |
|||||
759.50 |
765.50 |
6.00 |
<500 - 1900 |
|||||
768.50 |
771.50 |
3.00 |
<500 - 1200 |
|||||
774.00 |
777.00 |
3.00 |
<500 - 3500 |
|||||
791.00 |
794.00 |
3.00 |
<500 - 570 |
|||||
797.00 |
798.50 |
1.50 |
<500 - 900 |
|||||
802.00 |
805.50 |
3.50 |
<500 - 27000 |
|||||
808.50 |
815.50 |
7.00 |
<500 - 24000 |
|||||
969.50 |
973.00 |
3.50 |
<500 - 600 |
|||||
976.00 |
977.50 |
1.50 |
<500 - 1100 |
|||||
980.50 |
981.00 |
0.50 |
<500 - 580 |
|||||
983.50 |
984.00 |
0.50 |
<500 - 530 |
|||||
990.50 |
991.50 |
1.00 |
<500 - 600 |
|||||
AR-17-148c2 |
327 |
-70 |
1044.50 |
N/A |
693.50 |
694.00 |
0.50 |
<500 - 980 |
705.50 |
706.00 |
0.50 |
<500 - 4700 |
|||||
711.50 |
712.50 |
1.00 |
<500 - 3400 |
|||||
715.00 |
715.50 |
0.50 |
<500 - 700 |
|||||
718.50 |
729.50 |
11.00 |
<500 - 10500 |
|||||
739.50 |
741.50 |
2.00 |
<500 - 2600 |
|||||
746.00 |
747.00 |
1.00 |
<500 - 1400 |
|||||
753.00 |
754.00 |
1.00 |
<500 - 1000 |
|||||
757.00 |
768.00 |
11.00 |
<500 - 1400 |
|||||
777.00 |
777.50 |
0.50 |
<500 - 630 |
|||||
788.00 |
789.00 |
1.00 |
530 - 2100 |
|||||
791.50 |
795.00 |
3.50 |
<500 - 770 |
|||||
805.50 |
806.00 |
0.50 |
<500 - 530 |
|||||
816.50 |
817.00 |
0.50 |
<500 - 1000 |
|||||
827.00 |
827.50 |
0.50 |
<500 - 540 |
|||||
831.50 |
837.00 |
5.50 |
<500 - 15000 |
|||||
841.00 |
841.50 |
0.50 |
<500 - 820 |
|||||
879.50 |
880.50 |
1.00 |
<500 - 1000 |
|||||
894.50 |
895.00 |
0.50 |
<500 - 1000 |
|||||
907.50 |
908.00 |
0.50 |
<500 - 1000 |
|||||
934.50 |
938.50 |
4.00 |
<500 - 1300 |
|||||
942.00 |
942.50 |
0.50 |
<500 - 630 |
|||||
945.50 |
946.00 |
0.50 |
<500 - 650 |
|||||
950.00 |
953.50 |
3.50 |
<500 - 1100 |
|||||
AR-17-149c1 |
345 |
-70 |
1014.50 |
134.90 |
618.50 |
619.50 |
1.00 |
<500 - 4400 |
627.00 |
630.50 |
3.50 |
<500 - 4800 |
|||||
636.00 |
636.50 |
0.50 |
<500 - 1400 |
|||||
643.00 |
647.50 |
4.50 |
<500 - 29000 |
|||||
693.00 |
701.50 |
8.50 |
<500 - 1390 |
|||||
713.50 |
720.00 |
6.50 |
<500 - 48000 |
|||||
764.00 |
765.00 |
1.00 |
<500 - 850 |
|||||
794.00 |
795.50 |
1.50 |
<500 - 7000 |
|||||
798.50 |
799.50 |
1.00 |
<500 - 3000 |
|||||
859.00 |
860.00 |
1.00 |
<500 - 750 |
|||||
869.00 |
873.50 |
4.50 |
<500 - 7000 |
|||||
AR-17-149c2 |
345 |
-70 |
897.50 |
134.90 |
623.00 |
625.00 |
2.00 |
<500 - 52000 |
638.00 |
638.50 |
0.50 |
<500 - 700 |
|||||
670.00 |
670.50 |
0.50 |
<500 - 1300 |
|||||
674.00 |
674.50 |
0.50 |
<500 - 880 |
|||||
679.50 |
680.00 |
0.50 |
<500 - 730 |
|||||
688.50 |
699.50 |
11.00 |
<500 - 13000 |
|||||
731.50 |
735.00 |
3.50 |
<500 - 12600 |
|||||
763.00 |
765.00 |
2.00 |
<500 - 6500 |
|||||
AR-17-154c1 |
327 |
-70 |
854 |
120.6 |
419.00 |
419.50 |
0.50 |
<500 - 680 |
594.00 |
594.50 |
0.50 |
<500 - 1800 |
|||||
598.00 |
598.50 |
0.50 |
<500 - 3360 |
|||||
606.50 |
607.00 |
0.50 |
<500 - 850 |
|||||
613.00 |
616.50 |
3.50 |
<500 - 8700 |
|||||
626.00 |
628.00 |
2.00 |
<500 - 1600 |
|||||
633.50 |
637.00 |
3.50 |
<500 - 1000 |
|||||
643.00 |
643.50 |
0.50 |
<500 - 510 |
|||||
646.00 |
646.50 |
0.50 |
<500 - 505 |
|||||
678.00 |
679.00 |
1.00 |
<500 - 3600 |
|||||
703.50 |
704.00 |
0.50 |
<500 - 1600 |
|||||
706.50 |
708.00 |
1.50 |
<500 - 3600 |
|||||
717.00 |
733.50 |
16.50 |
<500 - >61000 |
|||||
736.50 |
737.50 |
1.00 |
<500 - 900 |
|||||
AR-17-154c2 |
327 |
-70 |
849.5 |
120.6 |
612.00 |
612.50 |
0.50 |
<500 - 1400 |
620.50 |
621.00 |
0.50 |
<500 - 510 |
|||||
737.50 |
738.00 |
0.50 |
<500 - 2200 |
|||||
AR-17-155c1 |
327 |
-70 |
828.5 |
128.6 |
422.50 |
423.50 |
1.00 |
<500 - 1000 |
426.00 |
426.50 |
0.50 |
<500 - 550 |
|||||
430.00 |
431.00 |
1.00 |
<500 - 2200 |
|||||
505.00 |
505.50 |
0.50 |
<500 - 810 |
|||||
509.50 |
510.00 |
0.50 |
800 - 18000 |
|||||
513.50 |
518.00 |
4.50 |
<500 - 12000 |
|||||
520.50 |
524.00 |
3.50 |
<500 - 13000 |
|||||
531.00 |
532.00 |
1.00 |
<500 - 25000 |
|||||
536.50 |
537.50 |
1.00 |
<500 - 6800 |
|||||
547.00 |
556.50 |
9.50 |
<500 - 23000 |
|||||
577.00 |
577.50 |
0.50 |
<500 - 2800 |
|||||
584.00 |
586.00 |
2.00 |
<500 - 4700 |
|||||
589.50 |
590.00 |
0.50 |
<500 - 900 |
|||||
606.00 |
615.00 |
9.00 |
<500 - 1600 |
|||||
620.00 |
630.00 |
10.00 |
<500 - 1200 |
|||||
637.00 |
637.50 |
0.50 |
<500 - 510 |
|||||
646.50 |
647.00 |
0.50 |
<500 - 520 |
|||||
681.00 |
690.00 |
9.00 |
<500 - 3100 |
|||||
693.00 |
698.00 |
5.00 |
<500 - 6300 |
|||||
702.50 |
703.00 |
0.50 |
<500 - 2200 |
|||||
705.50 |
706.50 |
1.00 |
<500 - 1550 |
|||||
723.00 |
723.50 |
0.50 |
<500 - 780 |
|||||
733.00 |
734.50 |
1.50 |
<500 - 2800 |
|||||
AR-17-155c2 |
327 |
-70 |
600.5 |
128.6 |
458.50 |
459.50 |
1.00 |
<500 - 920 |
463.00 |
464.00 |
1.00 |
<500 - 3200 |
|||||
466.50 |
477.50 |
11.00 |
<500 - 37000 |
|||||
480.00 |
481.50 |
1.50 |
<500 - 2400 |
|||||
486.50 |
487.00 |
0.50 |
<500 - 5350 |
|||||
490.00 |
492.00 |
2.00 |
<500 - 21000 |
|||||
501.00 |
501.50 |
0.50 |
<500 - 510 |
|||||
504.00 |
505.00 |
1.00 |
<500 - 21000 |
|||||
511.50 |
515.00 |
3.50 |
<500 - 16000 |
|||||
519.00 |
520.00 |
1.00 |
<500 - 2600 |
|||||
522.50 |
530.00 |
7.50 |
<500 - 49600 |
|||||
534.00 |
534.50 |
0.50 |
<500 - 1900 |
|||||
537.00 |
538.50 |
1.50 |
<500 - 6000 |
|||||
542.50 |
545.00 |
2.50 |
<500 - 3200 |
|||||
551.00 |
552.00 |
1.00 |
<500 - 3600 |
|||||
560.50 |
578.00 |
17.50 |
<500 - >61000 |
|||||
584.50 |
586.50 |
2.00 |
<500 - 950 |
|||||
AR-17-1556c1 |
327 |
-70 |
858.5 |
N/A |
657.50 |
662.00 |
4.50 |
<500 - 12900 |
664.50 |
665.00 |
0.50 |
<500 - 1300 |
|||||
671.50 |
674.00 |
2.50 |
<500 - 21000 |
|||||
676.50 |
703.00 |
26.50 |
<500 - 30500 |
|||||
707.50 |
711.00 |
3.50 |
<500 - 3600 |
|||||
743.50 |
744.00 |
0.50 |
<500 - 560 |
|||||
GAR-17-001 |
327 |
-70 |
597.1 |
115 |
272.00 |
277.00 |
5.00 |
<500 - 1150 |
280.00 |
301.00 |
21.00 |
<500 - 2300 |
|||||
417.50 |
419.50 |
2.00 |
<500 - 700 |
|||||
493.50 |
494.00 |
0.50 |
<500 - 700 |
|||||
531.50 |
537.50 |
6.00 |
<500 - 54000 |
Parameters:
- Maximum internal dilution 2.00 m downhole
- All depths and intervals are meters downhole, true thicknesses are yet to be determined. Resource modelling in conjunction with an updated mineral resource estimate is required before true thicknesses can be estimated.
- "Anomalous" means >500 cps (counts per second) total count gamma readings by gamma scintillometer type RS-120
- "Off-scale" means >10,000 cps (counts per second) total count gamma readings by gamma scintillometer type RS-120
- Where "Min cps" is <500 cps, this refers to local low radiometric zones within the overall radioactive interval
Arrow Deposit Drilling
AR-17-129c5
Hole AR-17-129c5 was a directional hole that departed its pilot hole at a depth of 471 m. This step-out hole was designed to test the A4 shear approximately 50 m up-dip of AR-17-129c1. Directional drilling was initiated at 486 m. The A3 and A4 shears were both intersected at an inclination of -60°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite (the A3 and A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with stringers, disseminated, foliation, and fracture-controlled mineralization. A total composite mineralization of 71.0 m including 5.85 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 295.0 m section (616.5 to 911.5 m). In the A3 shear, 49.0 m of composite mineralization including 2.35 m of off-scale radioactivity was intersected. In the A4 shear, 17.0 m of composite mineralization including 3.1 m of off-scale radioactivity was intersected. An additional 1.5 m of composite mineralization was intersected in the A2 shear and 3.5 m of composite mineralization including 0.4 m of off-scale radioactivity was intersected in the A5 shear. The hole was terminated at 960.5 m.
AR-17-129c6
Hole AR-17-129c6 was a directional hole that departed its pilot hole at a depth of 504 m. This step-out hole was designed to test A4 shear 50 m down-dip and northeast of AR-15-57c2. Directional drilling was initiated at 516 m. The A4 shear was intersected at an inclination of -64°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite (the A3 and A4 shears). Anomalous radioactivity was intersected in the A4 shear in association with disseminated and fracture-controlled uranium mineralization. A total composite mineralization of 2.5 m was intersected within a 222.5 m section (595.0 to 817.5 m). In the A4 shear, 2.0 m of composite mineralization was intersected. An additional 0.5 m of mineralization was intersected in the A5 shear. The hole was terminated at 876.5 m.
AR-17-129c7
Hole AR-17-129c7 was a directional hole that departed its pilot hole at a depth of 255 m. This step-out hole was designed to test A4 shear 15 m up-dip and northeast of AR-15-57c3. Directional drilling was initiated at 268 m. The A3 and A4 shears were intersected at an inclination of -64°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite (the A3 and A4 shears).
Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with stringers, disseminated, foliation, and fracture-controlled mineralization. A total composite mineralization of 28.5 m including 1.4 m of off-scale radioactivity (>10,000 to >58,000 cps) was intersected within a 207.0 m section (650.0 to 857.0 m). In the A3 shear, 11.5 m of composite mineralization was intersected. In the A4 shear, 12.5 m of composite mineralization including 1.3 m of off-scale radioactivity was intersected. An additional 4.5 m of composite mineralization was intersected in the A5 shear including 0.1 m of off-scale radioactivity. The hole was terminated at 960.5 m.
AR-17-143c2
Hole AR-17-143c2 was a directional hole that departed pilot hole AR-17-143c1 at a depth of 204 m. This step-out hole was designed to the southwest gap 50 m up-dip of AR-17-143c1. Directional drilling was initiated at 219 m. The A4 shear was intersected at an inclination of -68°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic and relatively narrow intervals of pelitic gneiss and mylonite (the A4 shear). Anomalous radioactivity was intersected in the A4 shear in association with disseminated uranium mineralization. A total composite mineralization of 0.5 m was intersected in the A4 shear. The hole was terminated at 729.5 m.
AR-17-143c3
Hole AR-17-143c3 was a directional hole that departed pilot hole AR-17-143c2 at a depth of 221 m. This step-out hole was designed to the southwest gap 50 down dip of AR-17-143c1. Directional drilling was initiated at 231 m. The A4 shear was intersected at an inclination of -72°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic and relatively narrow intervals of pelitic gneiss and mylonite (the A4 and A5 shears). Anomalous radioactivity was intersected in the A4 and A5 shears in association with stringers, disseminated, fracture, and foliation-controlled pitchblende mineralization. A total composite mineralization of 45.0 m including 1.45 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 276.5 m section (662.0 to 938.5 m). In the A4 shear, 29.5 m of composite mineralization including 0.15 m of off-scale radioactivity was intersected. In the A5 shear, 15.5 m of composite mineralization including 1.3 m of off-scale radioactivity was intersected. The hole was terminated at 974 m.
AR-17-146c1
Hole AR-17-146c1 was a step-out hole collared from surface at an angled orientation (-70°) to the northwest (327° Azimuth). The hole was designed to test the southwest gap 50 m up-dip and northeast of AR-16-103. Directional drilling was initiated at 201 m. The A3 shear was intersected at an inclination of -62°. Basement lithologies were intersected beginning at 110.4 m which consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite (A3 and A4 shears). Athabasca Group sandstones were not intersected. Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with stringers, disseminated, foliation, and fracture-controlled pitchblende mineralization. A total composite mineralization of 38.5 m including 0.5 m of off-scale radioactivity (>10,000 to 45,000 cps) was intersected within a 166.5 m section (630.5 to 797.0 m). In the A3 shear, 36.0 m of composite mineralization including 0.4 m of off-scale radioactivity was intersected. In the A4 shear, 1.0 m of composite mineralization including 0.1 m of off-scale radioactivity was intersected. An additional 1.5 m of composite mineralization was intersected in the A2 shear. The hole was terminated at 910.5 m.
AR-17-146c2
Hole AR-17-146c2 was a directional hole that departed pilot hole AR-17-146c1 at a depth of 331 m. This step-out hole was designed to test the southwest gap 50 m down-dip and northeast of AR-16-103. Directional drilling was initiated at 348 m. The A3 and A4 shears were both intersected at inclinations of -66°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss and relatively narrow intervals of pelitic gneiss and mylonite (the A3 and A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with disseminated, fracture, and foliation-controlled pitchblende mineralization. A total composite mineralization of 36.0 m including 2.55 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 121 m section (661.5 to 782.5 m). In the A3 shear, 28.0 m of composite mineralization including 2.5 m of off-scale radioactivity was intersected. In the A4 shear, 8.0 m of composite mineralization including 0.05 of off-scale radioactivity was intersected. The hole was terminated at 907.0 m.
AR-17-146c3
Hole AR-17-146c3 was a directional hole that departed hole AR-17-146c2 at a depth of 481 m. This step-out hole was designed to test the southwest gap 90 m down-dip and northeast of AR-16-103. Directional drilling was initiated at 496 m. The A3 and A4 shears were both intersected at inclinations of -69°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss and relatively narrow intervals of pelitic gneiss and mylonite (the A2 through A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A2 through the A4 shears in association with disseminated, fracture, and foliation-controlled pitchblende mineralization. A total composite mineralization of 55.0 m including 0.45 m of off-scale radioactivity (>10,000 to 15,000 cps) was intersected within a 287.5 m section (677.0 to 964.5 m). In the A2 shear, 3.5 m of composite mineralization was intersected. In the A3 shear, 44.0 m of composite mineralization including 0.45 m of off-scale radioactivity was intersected. In the A4 shear, 7.5 m of composite mineralization was intersected. The hole was terminated at 993.5 m.
AR-17-147c1
Hole AR-17-147c1 was a directional hole collared from surface at an angled orientation (-70°) to the northwest (327° azimuth). This infill hole was designed to test the A3 shear 30 m down-dip and northeast of AR-17-121c1. Directional drilling was initiated at 201 m. The A3 shear was intersected at an inclination of -65°. Strongly bleached Athabasca Group sandstone was intersected from 123.1 m to the unconformity at 133.9 m. Basement lithologies consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite (A3 and A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with stringers, disseminated, fracture-controlled, foliation-controlled, and semi-massive pitchblende mineralization. A total composite mineralization of 46.0 m including 5.1 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 153.0 m section (454.0 to 607.0 m). In the A3 shear, 41.0 m of composite mineralization was intersected including 4.3 m of off-scale radioactivity. In the A4 shear, 5.0 m of composite mineralization including 0.8 m of off-scale radioactivity was intersected. The hole was terminated at 621.5 m.
AR-17-147c2
Hole AR-17-147c2 was a directional hole that departed pilot hole AR-17-147c1 at a depth of 432 m. This infill hole was designed to test the A3 shear 25 m below AR-17-147c1. Directional drilling was initiated at 441 m. The A3 shear was intersected at an inclination of -69°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss and relatively narrow intervals of pelitic gneiss and mylonite (A3 and A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with stringers, disseminated, fracture-controlled, and semi-massive pitchblende mineralization. A total composite mineralization of 26.5 m including 4.8 m of off-scale radioactivity (>10,000 to 58,000 cps) was intersected within a 176 m section (454.5 to 630.5 m). In the A3 shear, 25.0 m of composite mineralization including 4.6 m of off-scale radioactivity was intersected. In the A4 shear, 1.5 m of composite mineralization including 0.2 m of off-scale radioactivity was intersected. The hole was terminated at 660.5 m.
AR-17-147c3
Hole AR-17-147c3 was a directional hole that departed pilot hole AR-17-147c2 at a depth of 448 m. This infill hole was designed to test the A3 shear 25 m below AR-17-147c2. Directional drilling was initiated at 458 m. The A3 shear was intersected at an inclination of -73°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss and relatively narrow intervals of pelitic gneiss and mylonite (A3 and A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with stringers, disseminated, fracture-controlled, foliation-controlled, and semi-massive pitchblende mineralization. A total composite mineralization of 86.5 m including 17.45 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 202 m section (454.5 to 656.5 m). In the A3 shear, 79.5 m of composite mineralization including 17.35 m of off-scale radioactivity was intersected. In the A4 shear, 7.0 m of composite mineralization including 0.1 m of off-scale radioactivity was intersected. The hole was terminated at 682.5 m.
AR-17-147c4
Hole AR-17-147c4 was a directional hole that departed pilot hole AR-17-147c1 at a depth of 210 m. This infill hole was designed to test the A3 shear 25 m below AR-17-147c3. Directional drilling was initiated at 222 m. The A3 shear was intersected at an inclination of -72°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss and relatively narrow intervals of pelitic gneiss and mylonite (the A2 through A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A2 through A4 shears in association with stringers, disseminated, fracture-controlled, and foliation-controlled pitchblende mineralization. A total composite mineralization of 90.5 m including 5.7 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 330.5 m section (522.5 to 853.0 m). In the A2 shear, 16.0 m of composite mineralization including 0.15 m of off-scale radioactivity was intersected. In the A3 shear, 67.5 m of composite mineralization including 5.45 m of off-scale radioactivity was intersected. In the A4 shear, 7.0 m of composite mineralization including 0.1 m of off-scale radioactivity was intersected. The hole was terminated at 870.5 m.
AR-17-148c1
Hole AR-17-148c1 was a directional hole collared from the surface at an angled orientation (-70°) to the northwest (327° azimuth). This step-out hole was designed to the southwest gap 50 m below AR-16-103. Directional drilling was initiated at 300 m. The A3 shear was intersected at an inclination of -69°.
Basement lithologies were intersected beginning at 108.0 m which dominantly consist of semi-pelitic gneiss with relatively narrow intervals of graphitic pelitic gneiss and mylonite (the A2 through A4 shears). The hole successfully intersected anomalous to strongly anomalous radioactivity in the A2 through A4 shears in association with disseminated, foliation-controlled, and fracture-controlled pitchblende mineralization. A total composite mineralization of 50.5 m including 2.0 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 486.5 m section (505.0 to 991.5 m). In the A2 shear, 7.0 m of composite mineralization was intersected. In the A3 shear, 15.0 m of composite mineralization including 1.0 m of off-scale radioactivity was intersected. In the A4 shear, 28.0 m of composite mineralization was intersected including 1.0 m of off-scale radioactivity. An additional 0.5 m of composite mineralization was intersected in the A5 shear. The hole was terminated at a depth of 1054.0 m.
AR-17-148c2
Hole AR-17-148c2 was a directional hole that departed pilot hole AR-17-148c1 at a depth of 628 m. This step-out hole was designed to the southwest gap 100 m down-dip of AR-16-103. Directional drilling was initiated at 642 m. The A3 shear was intersected at an inclination of -76°.Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite (A3 and A4 shears). The hole successfully intersected anomalous to strongly anomalous radioactivity in the A3 and A4 shears in association with disseminated, and fracture-controlled pitchblende mineralization. A total composite mineralization of 51.5 m including 0.2 m of off-scale radioactivity (>10,000 to 15,000 cps) was intersected within a 260 m section (693.5 to 953.5 m). In the A3 shear, 10.5 m of composite mineralization was intersected. In the A4 shear, 41.0 m of composite mineralization including 0.2 m of off-scale radioactivity was intersected. The hole was terminated at a depth of 1044.5 m.
AR-17-149c1
Hole AR-17-149c1 was a directional hole collared from the surface at an angled orientation (-70°) to the northwest (345° Azimuth). It was a step-out hole designed to test the northeast gap 110 m down-dip and northeast of AR-17-116c2. Directional drilling was initiated at 201 m. The A3 shear was intersected at an inclination of -68°.The hole intersected bleached Athabasca Group sandstones between 122.0 m and the unconformity at 134.9 m. Basement lithologies dominantly consisted of semi-pelitic gneiss with relatively narrow intervals of graphitic pelitic gneiss and mylonite (the A2 and A3 shears). The hole successfully intersected anomalous to strongly anomalous radioactivity in the A2 and A3 shears in association with stringers, disseminated, foliation-controlled, and fracture-controlled pitchblende mineralization. A total composite mineralization of 33.5 m including 0.95 m of off-scale radioactivity (>10,000 to 48,000 cps) was intersected within a 255 m section (618.5 to 873.5 m). In the A2 shear, 9.0 m of composite mineralization was intersected. In the A3 shear, 24.5 m of composite mineralization including 0.95 m of off-scale radioactivity was intersected. The hole was terminated at a depth of 1014.5 m.
AR-17-149c2
Hole AR-17-149c2 was a directional hole that departed pilot hole AR-17-149c1 at a depth of 540 m. This step-out hole was designed to test the northeast gap 50 m above AR-17-149c1. Directional drilling was initiated at 552 m. The A2 shear was intersected at an inclination of -64°. Basement lithologies were intersected from the top of the hole and dominantly consisted of semi-pelitic gneiss with relatively narrow intervals of graphitic pelitic gneiss and mylonite (the A2 through A3 shears). The hole successfully intersected anomalous radioactivity in the A2 and A3 shears in association with stringers, disseminated, fracture-controlled, and foliation-controlled pitchblende mineralization. A total composite mineralization of 20.5 m including 0.6 m of off-scale radioactivity (>10,000 to 52,000 cps) was intersected within a 142 m section (623.0 to 765.0 m). In the A2 shear, 5.5 m of composite mineralization including 0.2 m of off-scale radioactivity was intersected. In the A3 shear, 15.0 m of composite mineralization including 0.4 m of off-scale radioactivity was intersected. The hole was terminated at a depth of 897.5 m.
AR-17-154c1
Hole AR-17-154c1 was a directional hole collared from the surface at an angled orientation (-70°) to the northwest (327° Azimuth). It was a step-out hole designed to test the northeast gap 20 m up-dip and northeast of AR-17-133c2. Directional drilling was initiated at 205 m. The A2 shear was intersected at an inclination of -65°. The hole intersected bleached Athabasca Group sandstones between 108.9 m and the unconformity at 120.6 m. Basement lithologies dominantly consisted of semi-pelitic gneiss with relatively narrow intervals of graphitic pelitic gneiss and mylonite (the A2 and A3 shears). The hole successfully intersected anomalous to strongly anomalous radioactivity in the A2 through the A4 shears in association with stringers, disseminated, foliation-controlled, and fracture-controlled pitchblende mineralization. A total composite mineralization of 32.5 m including 1.8 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 318.5 m section (419.0 to 737.5 m). In the A2 shear, 21.0 m of composite mineralization including 1.8 m of off-scale radioactivity was intersected. In the A3 shear, 11.0 m of composite mineralization was intersected. Additionally, 0.5 m of composite mineralization was intersected in the A4 shear. The hole was terminated at a depth of 854.0 m.
AR-17-154c2
Hole AR-17-154c2 was a directional hole that departed pilot hole AR-17-154c1 at a depth of 228 m. This step-out hole was designed to test the northeast gap 80 m up-dip and northeast of AR-17-149c1 m. Directional drilling was initiated at 244 m. The A2 shear was intersected at an inclination of -68°. Basement lithologies were intersected from the top of the hole and dominantly consisted of semi-pelitic gneiss with relatively narrow intervals of graphitic pelitic gneiss and mylonite (the A2 through A3 shears). The hole successfully intersected anomalous radioactivity in the A2 and A3 shears in association with stringers, disseminated, fracture-controlled, and foliation-controlled pitchblende mineralization. A total composite mineralization of 1.5 m was intersected within a 126 m section (612.0 to 738.0 m). In the A2 shear, 0.5 m of composite mineralization was intersected. In the A3 shear, 1.0 m of composite was intersected. The hole was terminated at a depth of 849.5 m.
AR-17-155c1
Hole AR-17-155c1 was a directional hole collared from surface at an angled orientation (-70°) to the northwest (327° azimuth). This infill hole was designed to test the A3 shear 22 m up-dip from AR-17-118c1. Directional drilling was initiated at 202 m. The A3 shear was intersected at an inclination of -69°. Strongly bleached Athabasca Group sandstone was intersected from 120.7 m to the unconformity at 128.7 m. Basement lithologies consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite (A2 through the A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A2 through A4 shears in association with stringers, disseminated, fracture-controlled, and foliation-controlled pitchblende mineralization. A total composite mineralization of 63.5 m including 0.85 m of off-scale radioactivity (>10,000 to 25,000 cps) was intersected within a 312.0 m section (422.5 to 734.5 m). In the A2 shear, 17.5 m of composite mineralization was intersected. In the A3 shear, 38.0 m of composite mineralization was intersected including 0.55 m of off-scale radioactivity. In the A4 shear, 8.0 m of composite mineralization including 0.3 m of off-scale radioactivity was intersected. The hole was terminated at 828.5 m.
AR-17-155c2
Hole AR-17-155c2 was a directional hole that departed pilot hole AR-17-155c1 at a depth of 202 m. This infill hole was designed to test the A3 shear 34 m up-dip of AR-15-057c5. Directional drilling was initiated at 202 m. The A3 shear was intersected at an inclination of -67°. Basement lithologies were intersected beginning at the top of the hole and consisted largely of semi-pelitic gneiss and relatively narrow intervals of pelitic gneiss and mylonite (A3 and A4 shears). Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with stringers, disseminated, fracture-controlled, foliation-controlled and worm rock pitchblende mineralization. A total composite mineralization of 55.5 m including 5.7 m of off-scale radioactivity (>10,000 to >61,000 cps) was intersected within a 128 m section (458.5 to 586.5 m). In the A3 shear, 41.0 m of composite mineralization including 5.15 m of off-scale radioactivity was intersected. In the A4 shear, 14.5 m of composite mineralization including 0.55 m of off-scale radioactivity was intersected. The hole was terminated at 600.5 m.
AR-17-156c1
Hole AR-17-156c1 was a step-out hole collared from surface at an angled orientation (-70°) to the northwest (327° Azimuth). The hole was designed to test the southwest gap 45 m southwest of AR-16-103. Directional drilling was initiated at 157 m. The A3 shear was intersected at an inclination of -63°. Basement lithologies were intersected beginning at 103.5 m which consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite (A3 and A4 shears). Athabasca Group sandstones were not intersected. Anomalous to strongly anomalous radioactivity was intersected in the A3 and A4 shears in association with stringers, disseminated, foliation, and fracture-controlled pitchblende mineralization. A total composite mineralization of 38.0 m including 3.0 m of off-scale radioactivity (>10,000 to 30,500 cps) was intersected within an 86.5 m section (657.5 to 744.0 m). In the A3 shear, 33.5 m of composite mineralization including 2.8 m of off-scale radioactivity was intersected. In the A4 shear, 4.5 m of composite mineralization including 0.2 m of off-scale radioactivity was intersected. The hole was terminated at a depth of 858.5 m.
GAR-17-001
GAR-17-001 was the first hole drilled in the geotechnical segment of the Pre-Feasibility Study. The hole was collared from surface at an angled orientation (-70°) to the northwest (327° azimuth). The purpose of the hole was to provide data on the geotechnical and hydrogeological characteristics of the Arrow Deposit host rocks and overburden. Strongly bleached Athabasca Group sandstone was intersected from 104.2 m to the unconformity at 115.0 m. Basement lithologies consisted largely of semi-pelitic gneiss to granofel and relatively narrow intervals of pelitic gneiss and mylonite associated with the A1 shear zone. Anomalous to strongly anomalous radioactivity was intersected in the A1 shear in association with stringers, disseminated, and fracture-controlled pitchblende mineralization. A second zone of strongly anomalous radioactivity anchored by a narrow vein of semi-massive pitchblende mineralization was intersected in a new area northwest of the A1 shear. A total composite mineralization of 34.5 m including 0.9 m of off-scale radioactivity (>10,000 to 54,000 cps) was intersected within a 265.5 m section (272.0 m to 537.5 m). In the A1 shear, 28.0 m of composite mineralization was intersected. In the new zone northwest of the A1 shear, 6.5 m of composite mineralization was intersected including 0.9 m of off-scale radioactivity. The hole was terminated at a depth of 597.1 m.
About NexGen
NexGen is a British Columbia corporation with a focus on the acquisition, exploration and development of Canadian uranium projects. NexGen has a highly experienced team of uranium industry professionals with a successful track record in the discovery of uranium deposits and in developing projects through discovery to production.
NexGen owns a portfolio of prospective uranium exploration assets in the Athabasca Basin, Saskatchewan, Canada, including a 100% interest in Rook I, location of the Arrow Discovery in February 2014 and Bow Discovery in March 2015 and the Harpoon discovery in August 2016. The Arrow deposit's updated mineral resource estimate with an effective date of December 20, 2016 was released in March 2017, and comprised 179.5 M lbs U3O8 contained in 1.18 M tonnes grading 6.88% U3O8 in the Indicated Mineral Resource category and an additional 122.1 M lbs U3O8 contained in 4.25 M tonnes grading 1.30% U3O8 in the Inferred Mineral Resource category.
Technical Information
Natural gamma radiation in drill core reported in this news release was measured in counts per second (cps) using a Radiation Solutions Inc. RS-120 gamma-ray scintillometer. The reader is cautioned that total count gamma readings may not be directly or uniformly related to uranium grades of the rock sample measured; they should be used only as a preliminary indication of the presence of radioactive minerals.
Split core samples will be taken systematically, and intervals will be submitted to SRC Geoanalytical Laboratories (an SCC ISO/IEC 17025: 2005 Accredited Facility) of Saskatoon for analysis. All samples sent to SRC will be analyzed using ICP-MS for trace elements on partial and total digestions, ICP-OES for major and minor elements on a total digestion, and fusion solution of boron by ICP-OES. Mineralized samples are analyzed for U3O8 by ICP-OES and select samples for gold by fire assay. Assay results will be released when received and after stringent internal QA/QC protocols are passed.
All scientific and technical information in this news release has been prepared by or reviewed and approved by Mr. Garrett Ainsworth, P.Geo., Vice President – Exploration & Development for NexGen. Mr. Ainsworth is a qualified person for the purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101"), and has verified the sampling, analytical, and test data underlying the information or opinions contained herein by reviewing original data certificates and monitoring all of the data collection protocols. For details of the Rook I Project including the quality assurance program and quality control measures applied and key assumptions, parameters and methods used to estimate the mineral resource please refer to the technical report entitled "Technical Report on the Preliminary Economic Assessment of the Arrow Deposit, Rook 1 Property, Province of Saskatchewan, Canada" dated effective September 1, 2017 (the "Rook 1 Technical Report") prepared by Jason J. Cox, David M. Robson, Mark B. Mathisen, David A. Ross, Val Coetzee and Mark Wittrup, each of whom is a "qualified person" under NI 43-101. The Rook I Technical Report is available for review under the Company's profile on SEDAR at www.sedar.com. All intersections are downhole, true thicknesses are yet to be determined.
U.S. investors are advised that while the terms "indicated resources" and "inferred resources" are recognized and required by Canadian regulations, the U.S. Securities and Exchange Commission does not recognize these terms. U.S. investors are cautioned not to assume that any part or all of the material in these categories will ever be converted into mineral reserves.
Forward-Looking Information
The information contained herein contains "forward-looking statements" within the meaning of the United States Private Securities Litigation Reform Act of 1995 and "forward-looking information" within the meaning of applicable Canadian securities legislation. "Forward-looking information" includes, but is not limited to, statements with respect to the activities, events or developments that the Company expects or anticipates will or may occur in the future, including, without limitation, the completion of the technical report in support of the PEA. Generally, but not always, forward-looking information and statements can be identified by the use of words such as "plans", "expects", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", or "believes" or the negative connotation thereof or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved" or the negative connotation thereof.
Forward-looking information and statements are based on the then current expectations, beliefs, assumptions, estimates and forecasts about NexGen's business and the industry and markets in which it operates. Forward-looking information and statements are made based upon numerous assumptions, including among others, that the proposed transaction will be completed, the results of planned exploration activities are as anticipated, the price of uranium, the cost of planned exploration activities, that financing will be available if and when needed and on reasonable terms, that third party contractors, equipment, supplies and governmental and other approvals required to conduct NexGen's planned exploration activities will be available on reasonable terms and in a timely manner and that general business and economic conditions will not change in a material adverse manner. Although the assumptions made by the Company in providing forward looking information or making forward looking statements are considered reasonable by management at the time, there can be no assurance that such assumptions will prove to be accurate
Forward-looking information and statements also involve known and unknown risks and uncertainties and other factors, which may cause actual results, performances and achievements of NexGen to differ materially from any projections of results, performances and achievements of NexGen expressed or implied by such forward-looking information or statements, including, among others, negative operating cash flow and dependence on third party financing, uncertainty of the availability of additional financing, the risk that pending assay results will not confirm previously announced preliminary results, imprecision of mineral resource estimates, the appeal of alternate sources of energy and sustained low uranium prices, aboriginal title and consultation issues, exploration risks, reliance upon key management and other personnel, deficiencies in the Company's title to its properties, uninsurable risks, failure to manage conflicts of interest, failure to obtain or maintain required permits and licenses, changes in laws, regulations and policy, competition for resources and financing, and other factors discussed or referred to in the Company's Annual Information Form dated March 31, 2017 under "Risk Factors".
Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in the forward-looking information or implied by forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended.
There can be no assurance that forward-looking information and statements will prove to be accurate, as actual results and future events could differ materially from those anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking statements or information. The Company undertakes no obligation to update or reissue forward-looking information as a result of new information or events except as required by applicable securities laws.
SOURCE NexGen Energy Ltd.
Share this article