Constellium Reports Strong Second Quarter 2016 Financial Results

AMSTERDAM, Aug. 2, 2016 /PRNewswire/ -- Constellium N.V. (NYSE and Euronext: CSTM) today reported results for the second quarter ended June 30, 2016. Highlights below are in comparison to the second quarter of 2015.

• Shipments of 387k metric tons in line with prior year
• Revenue of €1.2 billion, down 10% mainly due to lower metal prices
• Net income of €9 million compared to a €47 million net loss in the prior year
• Adjusted EBITDA of €107 million, up 15% from prior year
• Cash Flows from Operating Activities of €182 million; Adjusted FCF of €104 million
• EPS of €0.08 in Q2 2016, up from (€0.45) in Q2 2015
• Strong Adjusted EBITDA per metric ton in all segments

Constellium's second quarter 2016 results reflect, in addition to normal seasonality, continued strong performance in our AS&I segment, which achieved record quarterly Adjusted EBITDA, and improved results in both our A&T and P&ARP segments. Revenues for the second quarter 2016 were €1.2 billion, a decrease of 10% from the second quarter 2015 mainly due to lower metal prices. On a like-for-like basis (excluding the impact of movements in London Metal Exchange prices, premiums and currency exchange rates), revenue decreased by 3% for this quarter. Net income for the second quarter 2016 was €9 million compared to a €47 million net loss in the second quarter of 2015. Adjusted EBITDA for Constellium reached a record €107 million, an increase of 15% from the second quarter 2015. Second quarter 2016 shipments were in-line with 2015 at 387k metric tons while Adjusted EBITDA per metric ton increased 15% for the second quarter 2016 to €275 compared to €241 for the second quarter 2015.

For the six months ended June 30, 2016, Constellium reported Adjusted EBITDA of €199 million, an increase of 6% from the prior year, reflecting record performance in AS&I and recovery in A&T, which were partially offset by softer results in P&ARP. Net income for the six months ended June 30, 2016 was €1 million compared to a €78 million net loss in same period last year. Adjusted EBITDA per metric ton for the period grew 8% to €265 compared to €245 in the same period last year. Revenues for the six months ended June 30, 2016, were €2.4 billion, a 14% decrease from the same period in the prior year primarily due to lower metal prices. On a like-for-like basis, revenues decreased by 4% for the period.

Commenting on the second quarter 2016 results, Jean-Marc Germain, Constellium's newly appointed Chief Executive Officer, said: "I am honored to be part of Constellium and to lead the continuing development of our global automotive and aerospace platforms to the next level, while maintaining our focus on operational execution in our packaging business. Constellium's second quarter results demonstrated continued strong performance in AS&I and improvement in both our A&T and P&ARP segments."

Quarter Highlights and Recent Developments

In July 2016, Constellium announced that it intends to open a new manufacturing facility in Mexico to produce aluminium automotive structural components. This plant, located in San Luis Potosí, is expected to allow Constellium to be close to the assembly lines of its customers and respond to the increasing demand for lightweight, high-strength aluminium crash management systems and automotive structures for the expanding automotive industry in Mexico.

In June 2016, Constellium announced its new sustainability targets for 2020. Constellium's 2020 sustainability targets include, among others, reducing landfilled production waste by 10%, further improving energy efficiency by 10%, increasing safety at work and remaining in the first industry quartile for safety results.

Group Summary

Adjusted EBITDA per metric ton and percentage changes are calculated on unrounded underlying figures.  n.m.: not meaningful

The difference between the sum of reported segment Adjusted EBITDA and the Group Adjusted EBITDA is related to Holdings and Corporate (see page 13). The difference between the sum of reported segment revenues and the Group revenues includes revenues from certain non-core activities, inter-segment eliminations, and the impact of a €20 million one-time payment related to the renegotiation of a customer agreement, which was recorded in the first quarter of 2016 as a reduction of revenues at the Holdings and Corporate level.

Results by Segment

Packaging & Automotive Rolled Products (P&ARP)

Adjusted EBITDA per metric ton and percentage changes are calculated on unrounded underlying figures.

Adjusted EBITDA for the P&ARP segment of €56 million was 4% ahead of 2015 and included a strong performance at Muscle Shoals, which benefited from high shipments and the impact of cost reduction initiatives at the plant. Adjusted EBITDA per metric ton increased by 5% to €209 over the same period in the prior year. A 12% reduction in revenue was mainly attributable to lower metal prices in 2016 versus 2015. Shipments overall were flat in the quarter compared to the prior year, with a strong growth in automotive rolled products offset by lower specialty and other thin-rolled product volumes.

For the six months ended June 30, 2016, Adjusted EBITDA was €98 million, which represented an 8% decrease from €106 million in the same period in 2015. This reflected lower volumes partially offset by cost savings at Muscle Shoals and lower energy prices across the segment. The metal management and product mix issues have now been resolved and we expect to be on track for a strong recovery at Muscle Shoals this year. The Body-in-White finishing lines scheduled to launch in 2016 in Europe, and in the U.S. with our partner UACJ, continue to progress according to plan.

Aerospace & Transportation (A&T)

Adjusted EBITDA per metric ton and percentage changes are calculated on unrounded underlying figures.

Second quarter 2016 results in the A&T segment increased to €31 million of Adjusted EBITDA, a 6% increase compared to the second quarter of 2015, despite stable shipments of 62k metric tons. The higher Adjusted EBITDA included the benefit of manufacturing improvements and cost savings. Adjusted EBITDA per metric ton rose from €470 in the second quarter of 2015 to €496 in the second quarter of 2016. Revenues for this quarter reflected the impact of lower metal prices.

For the six months ended June 30, 2016, Adjusted EBITDA and Adjusted EBITDA per metric ton increased 6% and 4%, respectively from the same period in the prior year and included the benefit of operational improvements across our manufacturing facilities. For the six months ended June 30, 2016, shipments increased by 2% compared to the same period in the prior year mainly from sales to the aerospace sector.

Automotive Structures & Industry (AS&I)

Adjusted EBITDA per metric ton and percentage changes are calculated on unrounded underlying figures.

The AS&I segment achieved a record Adjusted EBITDA of €29 million in the second quarter of 2016, representing an increase of 34% from the second quarter 2015. This improvement was driven by a 4% growth in shipments to 58k metric tons, with higher sales in the automotive structures business and good overall operational performance. Revenues decreased by 4% to €266 million, while Adjusted EBITDA per metric ton reached another record at €497 per metric ton, an increase of 28% from the comparable period in 2015.

For the six months ended June 30, 2016, Adjusted EBITDA and Adjusted EBITDA per metric ton were up 43% and 38% respectively from the comparable period in the prior year to €56 million and €491 per metric ton respectively. Higher volumes, which increased 3% to 115k metric tons, were driven by a good performance from automotive structures.

Net income

Net income in the second quarter 2016 was €9 million compared with a net loss of €47 million in the second quarter of 2015. The €56 million improvement primarily reflects increased Adjusted EBITDA for the quarter and the inclusion in 2015 of: asset impairment charges of €16 million related to our Swiss operations, €22 million of one-time costs at Muscle Shoals, and a €10 million charge relating to the sale of a non-core plant in France, partly offset by a higher tax charge of €26 million in the second quarter of 2016 compared with €8 million in the second quarter of 2015.

For the six months ended June 30, 2016, we reported net income of €1 million compared with a net loss of €78 million in the same period in 2015. The most significant difference between the two periods is an unrealized gain of €53 million on derivatives in 2016 compared to a €27 million loss in the same period in 2015.

Earnings per share

For the second quarter 2016, the diluted earnings per share was €0.08 versus a negative €0.45 for the second quarter 2015. For the six months ended June 30, 2016, the diluted earnings per share was €0.00 versus a negative €0.75 per share for the same period in 2015.

Liquidity and cash flow

Our liquidity position continues to remain strong. As of June 30, 2016, liquidity was €792 million, comprised of €7 million available under a revolving credit facility, €33 million available under our factoring facilities, €130 million available under our asset based lending facilities, and €622 million of cash and cash equivalents.

Adjusted free cash flow was €104 million for the second quarter of 2016 versus €73 million for the second quarter of 2015. Capital expenditures of €78 million for the second quarter of 2016 remained at a high level, as we continued to invest in our growth initiatives. Adjusted free cash flow benefited from higher net cash flows from operating activities in the second quarter of 2016 compared with the second quarter of 2015. The improvement in cash flows from operating activities reflected the higher level of income from operations partially offset by a lower reduction in working capital in the second quarter of 2016 compared to the same period in 2015.

For the six months ended June 30, 2016, Adjusted free cash flow was a negative €33 million compared with a positive €1 million in the corresponding period in 2015. In the first half of 2016, cash flows from operating activities of €123 million were offset by capital expenditures of €156 million.

Forward-looking statements

Certain statements contained in this press release may constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. This press release may contain "forward looking statements" with respect to our business, results of operations and financial condition, and our expectations or beliefs concerning future events and conditions. You can identify forward-looking statements because they contain words such as, but not limited to, "believes," "expects," "may," "should," "approximately," "anticipates," "estimates," "intends," "plans," "targets," likely," "will," "would," "could" and similar expressions (or the negative of these terminologies or expressions). All forward-looking statements involve risks and uncertainties.  Many risks and uncertainties are inherent in our industry and markets. Others are more specific to our business and operations. These risks and uncertainties include, but are not limited to, the ability of Constellium and Wise Metals to achieve expected synergies and the timing thereof, Constellium's increased levels of indebtedness which could limit Constellium's operating flexibility and opportunities; the potential failure to retain key employees, the loss of customers, suppliers and other business relationships as a result of the acquisition of Wise Metals; disruptions to business operations; slower or lower than expected growth in the North American market for Body-in-White aluminium rolled products, and other risk factors set forth under the heading "Risk Factors" in our Annual Report on Form 20-F, and as described from time to time in subsequent reports filed with the U.S. Securities and Exchange Commission. The occurrence of the events described and the achievement of the expected results depend on many events, some or all of which are not predictable or within our control. Consequently, actual results may differ materially from the forward-looking statements contained in this press release. We undertake no obligation to update or revise any forward-looking statement as a result of new information, future events or otherwise, except as required by law.

About Constellium

Constellium (NYSE and Euronext: CSTM) is a global sector leader that develops innovative, value added aluminium products for a broad scope of markets and applications, including aerospace, automotive and packaging. Constellium generated €5.2 billion of revenue in 2015. Constellium's earnings materials for the quarter ended June 30, 2016 are also available on the company's website (www.constellium.com).

* Includes €20 million one-time payment related to the renegotiation of a customer agreement, which was recorded in the first quarter of 2016 as a reduction of revenues at the Holdings and Corporate level.

(A) Represents the financial impact of the timing difference between when aluminium prices included within Constellium revenues are established and when aluminium purchase prices included in Cost of sales are established. The Group accounts for inventory using a weighted average price basis and this adjustment is to remove the effect of volatility in LME prices. The calculation of the Group metal price lag adjustment is based on an internal standardized methodology calculated at each of Constellium manufacturing sites and is calculated as the average value of product recorded in inventory, which approximates the spot price in the market, less the average value transferred out of inventory, which is the weighted average of the metal element of cost of sales, by the quantity sold in the period.

(B) For the six months ended June 30, 2016, start-up costs relating to new sites and business development initiatives amounted to €13 million of which €10 million related to Body-in-White growth projects both in Europe and the U.S.

(C) For the six months ended June 30, 2016, manufacturing system and process transformation costs related to supply chain reorganization mainly in our A&T operating segment.

(D) For the six months ended June 30, 2016, Wise one-time costs related to a one-time payment of €20 million, recorded as a reduction of revenues, in relation to the re-negotiation of payment terms, pass through of Midwest premium amounts and other pricing mechanisms in a contract with one of Wise's customers. We entered into the renegotiation of these terms in order to align the terms of this contract, acquired during the acquisition of Wise, with Constellium's normal terms of business. For the six months ended June 30, 2015, Wise one-time costs related to noncash step-up in inventory costs on the acquisition of Wise entities (€12 million), to the unwinding of Wise previous hedging policies losses incurred (€4 million) and to Midwest premium losses (€20 million).

(E) For the six months ended June 30, 2016, it mainly includes share based compensation expense for €3 million, offset by insurance proceeds of €4 million.

Non-GAAP measures

In addition to the results reported in accordance with International Financial Reporting Standards ("IFRS") as issued by the International Accounting Standards Board (all standards applied by the Group have been endorsed by the European Union), this press release includes information regarding certain financial measures which are not prepared in accordance with IFRS ("non-GAAP measures"). The non-GAAP financial measures used in this press release are: Adjusted EBITDA, Adjusted EBITDA per metric ton, Adjusted free cash flow and Net debt. Reconciliations to the most directly comparable IFRS financial measures are presented in the schedules to this press release. We believe these non-GAAP measures are important supplemental measures of our operating and financial performance. By providing these measures, together with the reconciliations, we believe we are enhancing investors' understanding of our business, our results of operations and our financial position, as well as assisting investors in evaluating how well we are executing our strategic initiatives. However, these non-GAAP financial measures supplement our IFRS disclosures and should not be considered an alternative to the IFRS measures and may not be comparable to similarly titled measures of other companies.

In considering the financial performance of the business, management and our chief operational decision maker, as defined by IFRS, analyze the primary financial performance measure of Adjusted EBITDA in all of our business segments. The most directly comparable IFRS measure to Adjusted EBITDA is our net income or loss for the period. We believe Adjusted EBITDA, as defined below, is useful to investors and is used by our management for measuring profitability because it excludes the impact of certain non-cash charges, such as depreciation, amortization, impairment and unrealized gains and losses on derivatives as well as items that do not impact the day-to-day operations and that management in many cases does not directly control or influence. Therefore, such adjustments eliminate items which have less bearing on our core operating performance.

Adjusted EBITDA measures are frequently used by securities analysts, investors and other interested parties in their evaluation of Constellium and in comparison to other companies, many of which present an Adjusted EBITDA-related performance measure when reporting their results.

Adjusted EBITDA is defined as income / (loss) from continuing operations before income taxes, results from joint ventures, net finance costs, other expenses and depreciation and amortization as adjusted to exclude restructuring costs, impairment charges, unrealized gains or losses on derivatives and on foreign exchange differences, metal price lag, share based compensation expense, effects of certain purchase accounting adjustments, start-up and development costs or acquisition, integration and separation costs, certain incremental costs and other exceptional, unusual or generally non-recurring items.

Adjusted EBITDA is the measure of performance used by management in evaluating our operating performance, in preparing internal forecasts and budgets necessary for managing our business and, specifically in relation to the exclusion of the effect of favorable or unfavorable metal price lag, this measure allows management and the investor to assess operating results and trends without the impact of our accounting for inventories. We use the weighted average cost method in accordance with IFRS which leads to the purchase price paid for metal impacting our cost of goods sold and therefore profitability in the period subsequent to when the related sales price impacts our revenues. Management believes this measure also provides additional information used by our lending facilities providers with respect to the ongoing performance of our underlying business activities. Historically, we have used Adjusted EBITDA in calculating our compliance with the financial covenants under certain of our loan facilities.

Adjusted EBITDA is not a presentation made in accordance with IFRS, is not a measure of financial condition, liquidity or profitability and should not be considered as an alternative to profit or loss for the period, revenues or operating cash flows determined in accordance with IFRS.

Adjusted free cash flow is net cash flow from operating activities less capital expenditure. Net debt is defined as borrowings plus or minus the fair value of cross currency interest swaps less cash and cash equivalents and cash pledged for the issuance of guarantees.

Management believes that Adjusted free cash flow is a useful measure of the net cash flow generated or used by the business as it takes into account both the cash generated or consumed by operating activities, including working capital, and the capital expenditure requirements of the business. Management believes that Net debt is a useful measure of indebtedness because it takes into account the cash and cash equivalent balances held by the Company as well as the total external debt of the Company.

Net debt and Adjusted free cash flow are not presentations made in accordance with IFRS, and should not be considered as an alternative to borrowings or operating cash flows determined in accordance with IFRS.

Logo - http://photos.prnewswire.com/prnh/20130624/NY37453LOGO

SOURCE Constellium

Related Links

http://www.constellium.com