Camtek Announces Third Quarter 2017 Results

MIGDAL HAEMEK, Israel, Nov. 7, 2017 /PRNewswire/ -- Camtek Ltd. (NASDAQ: CAMT) (TASE: CAMT), today announced its financial results for the quarter ended September 30, 2017.

Financial highlights of the third quarter 2017

• Semiconductor revenues were $23.8 million, up 13% year-over-year, in the upper end of the guidance range and a record for the semiconductor segment;
• GAAP gross margins reached 49.3%; non GAAP gross margin of 49.4%;
• GAAP operating margins of 12.0%; non-GAAP operating margins of 12.3%;
• GAAP net profit of $11.7 million;
• Non-GAAP net income from continuing semiconductor operations of $2.9 million; up 194% year-over-year;
• End of quarter net cash balance of $21.7 million; additional $22.0 million received on October 2, 2017 as second installment of the PCB transaction.

Guidance for the Fourth Quarter of 2017

Fourth quarter revenues are expected to increase to between $24-25 million, while operating costs are expected to decrease and continue to benefit from Camtek becoming a focused semiconductor inspection and metrology company. As a result, non-GAAP operating margins are expected to improve to approximately 15% in the fourth quarter of 2017, with continued improvement in 2018.

Due to the completion of the sale of Camtek's PCB business at the end of the third quarter, the results of this unit ceased to be consolidated into Camtek's financial statements and are accounted for as discontinued operations in both the current period ended September 30, 2017, as well as the comparative periods. Following the sale of the PCB business, the Company recorded one-time income of $12.5 million to GAAP net income in the third quarter 2017 results. This amount is excluded from the non-GAAP results. The reconciliation between the GAAP and non-GAAP results appears in the tables at the end of this press release.

Dividend Announcement

Camtek's Board of Directors declared a cash dividend in the amount of $0.14 per share representing an aggregate distribution of approximately $4.9 million. The dividend will be paid on November 30, 2017 to all shareholders of record at the close of the NASDAQ Global Select Market on November 22, 2017.

Management Comment

Rafi Amit, Camtek's CEO, commented, "The past few months have been very significant for Camtek from a strategic perspective. We successfully completed the divestment of our PCB business, settled outstanding legal litigation and minimized our FIT-related expenses. Following these initiatives, Camtek has now become a focused semiconductor inspection and metrology company, with significantly reduced operating expenses, which will allow us to continue to support strong and growing levels of profitability." 

Added Mr. Amit, "Our guidance for the fourth quarter calls for continued sequential growth in our revenue, built on strong momentum in our markets and we do not see any sign of a seasonal or other slowdown in demand. We intend to capitalize on this momentum and the opportunities we see in our end markets. We recently completed developing a number of breakthrough technologies which will enable us to increase our total available market. We expect them also to increase our market share both in the metrology and the inspection segments. We introduced our new inspection platform, Eagle^T2D, to the market at the beginning of the year and have already sold it to several major customers. Furthermore, our new system dedicated for the 3D Advance Packaging market, Eagle^T-AP, was tested by a number of tier-1 customers, showing excellent performance in terms of accuracy and throughput, leaving behind all our competitors' latest systems. Following the positive feedback from our customers, we expect to receive orders for multiple systems in the first half of 2018. We believe that these achievements will enable us to increase our dominance in the 3D segment of the advanced packaging sector, strengthening our leading competitive position."

Concluded Mr. Amit, "Given the significant $32 million in cash that we received from the PCB transaction, and in light of the high level of cash on our balance sheet, the Board of Directors decided to distribute dividend to shareholders which amounted to $4.9 million. This is a reflection of our continued success and our dedication to the creation of shareholder value. We look forward to bringing our business to the next level over the coming years, with even greater vigor and focus."

Third Quarter 2017 Financial Results

Revenues for the third quarter of 2017 were $23.8 million. This compares to third quarter 2016 revenues of $21.0 million, a growth of 13%.

Gross profit on a GAAP and non-GAAP basis in the quarter totaled $11.8 million (49.3% and 49.4% of revenues, respectively). This is compared to $4.4 million (20.9% of revenue) on a GAAP basis and $9.3 million (44.4% of revenues) on a non-GAAP basis in the third quarter 2016. The gross profit in 2016 on a GAAP basis included one-time costs related to the reorganization of Camtek's FIT business. The variance in the non-GAAP gross margin between quarters is a function of the product and sales mix delivered in the quarter.

Operating profit on a GAAP basis in the quarter totaled $2.8 million (12.0% of revenues), compared to an operating profit of $0.3 million (1.4% of revenues) in the third quarter 2016.

Operating profit on a non-GAAP basis in the quarter totaled $2.9 million (12.3% of revenues), compared to $1.3 million (6.0% of revenues), in the third quarter 2016.

Net income on a GAAP basis in the quarter totaled $11.7 million, or $0.33 per share. This income consists of $2.8 million in net income from continuing operations and $8.9 million from the discontinued operations and the sale of the PCB business. This compares to net income of $1.1 million, or $0.03 per diluted share in the third quarter 2016. 

Net income from continuing operations on a non-GAAP basis in the quarter totaled $2.9 million, or $0.08 per diluted share, compared to non-GAAP net income of $1.0 million, or $0.03 per diluted share, in the third quarter 2016. 

Cash, cash equivalents, short and long-term restricted deposits, as of September 30, 2017 were $21.7 million compared to $19.7 million as of December 31, 2016. During the third quarter, Camtek paid Rudolph $13 million in a legal settlement. Camtek also received $10 million in initial proceeds from the sale of its PCB business. On October 2, 2017, Camtek received a further $22 million in proceeds from the sale of its PCB business.

Conference Call

Camtek will host a conference call today, November 7, 2017, at 9:00 am ET.

Rafi Amit, CEO, Moshe Eisenberg, CFO and Ramy Langer, VP, Head of the Semiconductors Business will host the call and will be available to answer questions after presenting the results. To participate, please call one of the following telephone numbers a few minutes before the start of the call.

For those unable to participate, the teleconference will be available for replay on Camtek's website at http://www.camtek.com beginning 24 hours after the call.

ABOUT CAMTEK LTD.

Camtek is a leading manufacturer of metrology and inspection equipment and a provider of software solutions serving the Advanced Packaging, Memory, CMOS Image Sensors, MEMS, RF and other segments in the Mid End of the Semiconductors industry.

Camtek provides dedicated solutions and crucial yield-enhancement data, enabling manufacturers to improve yield and drive down their production costs.

With eight offices around the world, Camtek has best-in-class sales and customer support organization, providing tailor-made solutions in line with customers' requirements.

This press release is available at http://www.camtek.com

This press release may contain projections or other forward-looking statements regarding future events or the future performance of the Company. These statements are only predictions and may change as time passes. We do not assume any obligation to update that information. Actual events or results may differ materially from those projected, including as a result of changing industry and market trends, reduced demand for our products, the timely development of our new products and their adoption by the market, increased competition in the industry, price reductions as well as due to risks identified in the documents filed by the Company with the SEC.

This press release provides financial measures that exclude: (i) discontinued operations; (ii) revaluation of liabilities with respect to the acquisition of Printar; (iii) share based compensation expenses, ( iv) changes in valuation allowance on deferred tax assets, and (v) settlement expenses, and are therefore not calculated in accordance with generally accepted accounting principles (GAAP). Management believes that these Non-GAAP financial measures provide meaningful supplemental information regarding our performance. The presentation of this non-GAAP financial information is not intended to be considered in isolation or as a substitute for the financial information prepared and presented in accordance with GAAP. Management uses both GAAP and non-GAAP measures when evaluating the business internally and therefore felt it is important to make these non-GAAP adjustments available to investors. A reconciliation between the GAAP and non-GAAP results appears in the tables at the end of this press release.

* The financial position of the PCB business is presented as discontinued operations.

** Reclassified

* The financial results of the PCB business are presented as discontinued operations.

(1)     During the nine months ended September 30, 2017, the Company recorded a provision of $13 million ($12 million net of tax) in conjunction settlement with Rudolph Technologies Inc.

(2)     During the nine months ended September 30, 2017 the Company recorded net income of $4.5 million as a result of a decrease in the valuation allowance on deferred tax assets following the evaluation of the realizability of the assets based on projected future earnings.

(3)     During the three and nine months ended September 30, 2016 and the year ended December 31, 2016, the Company recorded reorganization costs with regard to the FIT activities of  $0.9 million, consisting of: (1) inventory and fixed asset write-offs of $4.9 million, recorded under cost of revenues line item; (2) other expenses of $0.1 million, recorded under cost of revenues line item; (3) fixed asset write-offs of $0.7 million, recorded under operating expenses; (4) other expenses of $0.2 million, recorded under operating expenses; and (5) income from write-off of liabilities to OCS $5.0 million, recorded under operating expenses.

(4)     During the nine months ended September 30, 2016 and the year ended December 31, 2016, the Company recorded acquisition expenses of $0.2 million, consisting of revaluation adjustments of $0.2 million of contingent consideration and certain future liabilities recorded at fair value. These amounts are recorded under finance expenses line item.

(5)     Due to the completion of the sale of Camtek's PCB business at the end of the third quarter of 2017, the results of this unit ceased to be consolidated into Camtek's financial statements and are accounted for as discontinued operations in both the current period ended September 30, 2017, as well as the comparative periods. Following the sale of the PCB business, the Company recorded one-time income of $12.5 million to GAAP net income in the third quarter 2017 results. This amount is excluded from the non-GAAP results.

SOURCE Camtek Ltd

Related Links

http://www.camtek.com