PUNE, India, July 31, 2013 /PRNewswire/ --
Addressing the P25 Steel Turning Challenge
Steel turning in the ISO P25 area is the mainstay of operations at machine shops the world over. Optimized processes are a prerequisite in a fiercely competitive global marketplace and production engineers are continually looking for ways to deliver competitive advantage.
(Logo: http://photos.prnewswire.com/prnh/20130624/622699)
(Photo: http://photos.prnewswire.com/prnh/20130731/630851)
So what are the key issues faced by engineers in this critical area, and how can tool manufacturers and material development help solve these challenges to deliver an optimized process?
Assessing the requirement
As an operation, steel turning needs to address and balance many factors. These include maximized output, extended and more predictable tool life, high reliability for limited/unmanned supervision, guaranteed surface quality, and the ability to accommodate the entire large and varied P25 material area. Of particular importance is the condition of the edge-line - if this is broken, rapid breakdown occurs that can result in unacceptable parts and loss of machining security.
First of all, it should be noted that ISO P25 steel is not a straightforward material classification when it comes to cutting tool solutions. Parts, processes, features and machining conditions vary widely in this general turning classification, which can include operations from roughing to finishing on out-of-round or near-net-shape cast or forged parts. Then there is the material, which might be unalloyed or highly alloyed, offering hardness values that differ enormously from one end of the spectrum to the other.
With so many variables impacting on cutting tool insert performance, sourcing a single grade to accommodate the wide-ranging demands of P25 can be a thankless task. Indeed, there are many prerequisites for any grade making such claims. For instance, fracture resistance is paramount, as is a cutting edge capable of delivering the hardness needed to resist any plastic deformation induced by the extreme temperatures present in P25 cutting zones. Furthermore, the insert coating must be able to prevent flank wear, crater wear and edge build-up. Crucially, the coating must also adhere to the substrate. If the coating fails to stick, the substrate is exposed, leading to rapid failure.
In all instances, the optimum wear pattern for any insert is controlled flank wear as it results in predictable life of cutting edges. The ideal grade is one that limits the development of unwanted types of wear - and in some operations, prevents it from developing at all.
Edge benefits
In today's high-paced steel turning arena, the tool life of an indexable insert depends on it having an intact edge line to cut the metal effectively and produce a satisfactory finish. Limiting continuous, controllable wear and eliminating discontinuous, often uncontrollable wear, is the secret of success. This is why insert grade manufacturers work hard to produce solutions that really tackle the mechanisms leading to premature breakdown. And to do this, the individual types of wear need to be examined.
So, beginning with flank wear, this is essentially abrasive wear on the clearance face below the edge line. Flank wear is the natural erosion of the tool material that takes place during the metal cutting process and is acceptable if allowed to develop in a controlled manner. In some documented cases, the development of balanced flank wear has even been advantageous to the cutting process. However, if flank wear occurs too rapidly, then some of the machining parameters require adjusting, either in the process or the grade.
Crater wear is the other common type of controllable wear, and is caused in steel turning by the effect of heat and pressure. Excessive development can lead to a change of insert geometry, resulting in an inferior cutting process. In time, this leads to edge weakening, and as such presents a major risk to successful machining.
Controlled wear patterns
Both flank wear and crater wear are natural and common in steel turning, and as long as it is only these wear patterns that are being experienced - and controlled - the machining process is satisfactory, with the caveat of achieving sufficiently high cutting speeds and tool life.
Of course, complete predictability is a utopian situation that in reality isn't easy to achieve, particularly considering the current market trend in machining with limited or no supervision. This presents many potential hazards as discontinuous wear types are harder to control. In an ideal world a cutting tool insert grade for P25 steel turning would be able to resist all types of discontinuous wear when machining within recommended parameters, making true lights-out, unmanned metalcutting operations possible.
A good example of discontinuous wear is plastic deformation, where the cutting edge is depressed. This is a wear type that develops if the temperature is too high for the grade being deployed. It may start with several small thermal cracks appearing across the cutting edge, or with the coating flaking away from the edge to leave an exposed substrate. These types of failure mechanisms can lead to rapid process breakdown - a truly uncontrollable and unacceptable situation.
Trade-off
Often it is a matter of achieving a 'trade-off' that balances the rate of continuous and discontinuous wear to achieve maximum cutting edge security over a long tool life with high cutting data. This notion starts to embrace the overlapping zones of the harder P15 and tougher P35 classifications. Also, in steel turning applications, other tool factors that determine outcome should also be considered, such as insert micro and macro geometry, nose radius, insert size and shape. It is the combination of these with the insert grade that will determine success as almost any machinist can make good use of a high performing P25 grade.
Glimpse of the future
In truth, the ISO P25 steel turning application area is one of the most difficult to cut. That's why engineers are continually searching for solutions that help them deliver improved, benchmarked performance from just one insert grade. As well as improving cutting speeds these grades should, ideally, help to improve process security and tool life. In this way the right insert can contribute to productivity increases that, in turn, give a competitive advantage.
About Sandvik Coromant
Sandvik Coromant is a global leading supplier of cutting tools, tooling solutions and know-how to the metalworking industry. With extensive investments in research and development we create unique innovations and set new productivity standards together with our customers. These include the world's major automotive, aerospace and energy industries. Sandvik Coromant has 8000 employees and is represented in 130 countries. We are part of the business area Sandvik Machining Solutions within the global industrial group Sandvik.
For more information, visit the website at www.sandvik.coromant.com/in
Primary Media Contact: Abhijeet Choure, [email protected], 91-95525-98350
Share this article